ET Electronic Ant Repeller Targeting Information.

This page explains how to target your ant problem as well as giving all the great information the ET pest Control has to offer.

Pest Direct Targeting Switch
This is the first Switch you will set when it comes to getting rid of your Ant Control Problem. By setting this switch to the High Ultrasonic Ranges you will be focusing all the High Impact Ultrasonic Sounds at your ant problem. We feel this special technique powers out ants with a higher demand.

Set to High Range and its as simply as that for targeting ANTS OUT!

Here is what the Targeting Ranges repel.

HIGH RANGE: Targets Ants.

In the High Range we have had Successes with Repelling all different types of Ants, along with Bedbugs, Bees, Beetles, Bats, Cockroaches, Centipedes, Earwigs, Flies, Fleas, Ladybugs, Moths, Mosquitoes, Spiders, Scorpions, Silverfish, Termites, and Ticks.

LOW RANGE: Targets Rodents. We had Successes with Mice, Rats, and Squirrels.

PEST SOUND CONFUSION:
Pest Sound Confusion is the way Sound comes out of the speakers.

The ET Pest Control was built with this feature so you the customer have the best of both worlds for Ultrasonic Repelling.

ET Pest Control plugs in to any common US plug outlet.

ET Pest Control repels up to 5000 square feet in open area. Meaning not confined to walls and obstruct object in its way.

Check out our FREE Proper Application Guide

FIXED PITCH:
Starting out repelling your Ant problem we suggest using FIX PITCH. This mode equals Two different Continuous High Powered Ultrasonic Tones coming out of each speaker targeting your ant problem. (if after 10 days you see no improvement switch the Fixed Pitch to Variable Pitch)

Variable PITCH:
In this mode the ET Pest Control takes control of all of its repulsive High Impact Ultrasonic Sounds creating a Siren Affect (Squalling tones as it climbs up and down the scale rapidly). The idea behind this is so that ET Pest Control gets within the repelling ranges of your ant infestation problem.

Here is an example of this mode: "VARIABLE PITCH" TARGETING "HIGH RANGE" the ET Pest Control will mainly focus on the High Ranges (Targeting Ants) moving up and down the scale. After four intervals it will BLIP ONCE into the Low Ranges (Covering RODENTS Type Pests) running the scale once and back to the HIGH RANGES all over again.

SPEAKER OUTPUT SWITCH:
OUTPUT controls speakers continuously running or turning on and off.

Continuous: speakers run full time.

Random: speakers turn themselves on and off.

CONTINUOUS OUTPUT: In this mode the speakers will run continuously and this is the best mode for repelling while you're getting rid of your pest problem. The ET Pest Control uses 3-4 watts of power in this mode.

RANDOM OUTPUT: In this mode the speakers will turn themselves On and OFF creating a slight change in the way you repel your pest problem. It also will save on electricity down to 2-3 watts. This mode is best used once your pest problem is under control, but can always be tried as a 3rd option for repelling your problem.

The RANDOM OUTPUT has a slight Tic Toc noise that might not be tolerable. This mode is not a must but an extra feature so don't worry if you do not want to use it just simply leave the ET Pest Control on OUTPUT. CONT.